Commscope Redwood version 2.1 Manual de usuario descargar pdf (Pagina 16)

SYSTEM INSTALLATION

GUIDE

16 Redwood System Installation Guide v2.1

Redwood System Installation Guide

4.7 Install Redwood Universal Gateways

Redwood LED Gateway for LED fixtures and Universal Gateway for

fluorescent, CFL, HID, LED, etc. fixtures

Redwood LED Gateways and Universal Gateways are installed next to each fixture. LED Gateways and

are designed to work specifically with Redwood Ready LED fixtures. The Universal Gateways turn on

and off any light fixture type (e.g. fluorescent, CFL, HID, LED, etc.) and provides output signals to

control one or two external dry contact relays.

Each Gateway stores fixture-specific information that assists in installation and commissioning.

IMPORTANT NOTES

• The Redwood LED gateway must be within 6 feet (1.8m) of Redwood Sensor.

• Make sure Gateways are connected to the paired fixture counterpart. For example, an LED

Gateway ships paired with a specific fixture type and must be installed with the matching

fixture type otherwise it may not operate as expected, at all, or even be damaged due to the

incorrect current level.

• Redwood enabled fixtures often come with connection whips that are 24 inches (60cm). If

placing the Gateways more that 12 inches (30cm) from the edge of a fixture, a Redwood

extender cable will be required to be used with the installation.

For more information, see the Redwood Gateway Installation Guide.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Commscope Redwood version 2.1 Manual de usuario Pagina 16